Skip Navigation Links
Home
About UsExpand About Us
Furniture SystemsExpand Furniture Systems
ProjectsExpand Projects
Services
News & Events
Locate UsExpand Locate Us
GalleryExpand Gallery
Work tops /Sinks

WORKTOPS-AND-SINKS_31.jpg WORKTOPS-AND-SINKS_32.jpg WORKTOPS-AND-SINKS_33.jpg WORKTOPS-AND-SINKS_34.jpg
WORKTOPS-AND-SINKS_45.jpg
WORKTOPS-AND-SINKS_38.jpg
WORKTOPS-AND-SINKS_46.jpg
WORKTOPS-AND-SINKS_35.jpg
WORKTOPS-AND-SINKS_47.jpg
WORKTOPS-AND-SINKS_39.jpg
WORKTOPS-AND-SINKS_40.jpg
WORKTOPS-AND-SINKS_48.jpg
WORKTOPS-AND-SINKS_41.jpg WORKTOPS-AND-SINKS_42.jpg WORKTOPS-AND-SINKS_43.jpg WORKTOPS-AND-SINKS_44.jpg
Epoxy resin
The worktop shall be monolithic, filled epoxy resin product and shall consist of a polymerized cast resin material formulated to provide a work surface with high chemical resistance characteristics. The combination of epoxy resin and asbestos free inert material shall be oven-cured in molds to obtain maximum physical strength and stability. It is available in thickness of 19mm and different color combination. Edges and corners furnished with flat, radius marine edges to prevent spillage of fluids. Worktops shall be provided with 100mm high backsplash ever shown in drawing same material and thickness as worktop. Applied backsplashes are to be joined to the top at the job site. Also these tops shall be highly resistant to normally used laboratory reagents. Worktops.jpg
Cabinetry.jpg
Fume-Extration.jpg
Service-Fittings.jpg
Safety-System.jpg
Special-Storage.jpg
Accessories.jpg
Special-Benches1.jpg
Reception-Counters.jpg
Shelving-System.jpg
Phenolic resin

The worktop shall be with 16mm thick Trespa Toplab plus, a self supporting flat panel with a cellulose fiber reinforced phenolic resin core. Each panel has an integrated decorative surface based on pigmented, electron beam cured resins which are resistant to the most aggressive chemicals and easy to clean and maintain.

Ceramic Tiles:  
The worktops shall be made of first grade Acid resistant red colored ceramic tile of 145x145mm with raised rim, are bonded to 36mm thick plywood base and jointed chemically resistant cement.  
Stainless steel:  
The worktop made of 316 grade steel bonded on to wood core with suitable reinforcing on the under side they are available flat edge or raised edges.  
Solid surface:  

Solid surface tops are used where the appearance with the properties of prime importance. It offers a seamless installation, which give scope for high degree of creativity. Acrylic sinks are used with practically no visibility of joint.

 

Melamine laminated plywood:

 
The worktop shall be made of water proof bonded furniture grade plywood of 24mm, 30mm, 36mm thickness and finished with high pressure melamine laminate of 0.9mm thickness on both sides. All edges shall be finished with 3mm thick PVC edging bonded by means of hot melt glue at 205degrees Celsius in the factory.  

 
Skip Navigation Links
Home
Quality Policy
Major Projects
News & Events
Location Map
Feedback


© 2009 All rights reserved LabPlus
Powered by Meridian Solutions Inc.